Acetelyne

• Main Technical Parameter
o Porosoty of porous mass: 90-92%
o Compressive strength of porous mass: ≥1.8 N/nm2
o Yield temperature of fusible plug: 100±5 °C
o utive standard of Filler: GB11638-2003

Application

1. Oxy-Fuel Cutting


Oxy-fuel cutting is a cost-effective method of plate edge preparation for bevel and groove welding. It can be used to easily cut rusty and scaled plates and only requires moderate skill to produce successful results. The oxy-fuel gas cutting process s a chemical reaction of oxygen with the base metal at elevated temperatures to sever the metal. The necessary temperature is maintained by a flame from the combustion of a chooseed fuel gas mixed with pure oxygen.
The process is based on the rapid formation of iron oxide which occurs when a high-pressure pure oxygen stream is introduced into the cutting envelope. The iron is quickly oxidized by the high purity oxygen and heat is liberated by this reaction. The oxygen stream and combusted gas transport the molten oxide away and the metal in its path burns, producing a narrow cut known as a kerf. Continued iron oxide formation requires large volumes of oxygen to be delivered to the cut zone at a controlled preset pressure. The intense heat produced by this reaction sustains the cutting process and the production of the cut.
Common oxy-fuel cutting applications are limited to carbon and low alloy steel. These materials can be cut economically, and the setup is quick and simple. For manual oxy-fuel gas cutting there is no electric power requirement and equipment costs are low. Materials from 1/16in (1.6mm) to 4in (102mm) thick are commonly cut using manual oxy-fuel gas cutting. Materials 12in (0.3m) and greater in thickness are successfully severed using machine cutting.


2. Heat Treating for Automotive & Transportation Equipment


Driven to provide the strength you need
When it comes to finding processes that strengthen your automotive metals, we can help your business race ahead. Heat treating enhances the strength and durability of metals, and we’ll work with you to build the toughest driving machines possible. We offer a diverse portfolio of heat treating applications that can improve the quality and appearance of your metals, make highly reproducible parts and give you better control over your process. Not only that, we can help you find ways to heat treat efficiently, so you never have to choose between cost and quality.

首页banner1
首页banner2
首页banner3

TechWelding NV • Noord Rosendaal Nst. 79 • Willemstad, Curaçao

Telephone +599 9 869 - 3650 • Wallyjr@techwelding.net